3nine, is a Swedish Technological Company, develops & offers technical solutions for the purification of processed air, mainly for the Machine Tools Industry. Our revolutionary technology is based on centrifugal separation, using a disc stack which achieves an extremely high degree of purification efficiency in a very compact format and requires minimum maintenance.

For more information :http://www.3nine.com/


MODEL : LINA

The Lina 500 is the smallest oil mist separator in the 3nine BLUE LINE Series. It was specifically designed for enclosed machine tools, with a cabin size of 176 CF or less.
The Lina oil mist separator has a capacity of 300 CFM (500 m
3/h) and is designed to be mounted directly on a machine tool. This saves floor space and unnecessary pipe work. It also makes it easier to move the machine when production requirements change.

Users with small machine tools can now afford the same constant efficiency, flexibility, minimal maintenance solution offered by other 3nine products. The Lina offers unbeatable economy and a very quick ROI.

As with other 3nine products, its maintenance requirements are minimal. The patented rotating disc stack separates the oil mist far more effectively than other filtered oil mist collection technologies such as cyclones, rotary filters, filtered units and electrostatic filtration.


More visit : http://www.3nine.com/products/blue-line/lina-500/


  
MODEL : NOVA 300

The Nova 300 is suited for all applications involving processes using oil, coolants or other lubricants. The Nova works on all machine tools with a cabin volume up to 70CF (2m3) and has a flow rate capacity of 176 CFM (300 m3/h) .
The GREEN LINE Series combines disc stack technology with counter flow technology and is suitable for applications with high degrees of solid particles combined with large quantities of oil mist. The Nova is compatible with tough applications such as grinding and machining of cast iron, as well as simple applications such as turning and milling.

Equipped with a LED RGB-strip you will always have full control of its performance and full knowledge of its mechanical status. It reports on the HEPA filter status, the condition of the drive belt, rotor and motor.


More visit : http://www.3nine.com/products/green-line/nova-300/


  
MODEL : CLARA

The Clara 1000 is 3nine's most popular oil mist separator. With a flow rate of 600CFM (1000m3/h), it is suitable for just about any type of machine tool with a cabin size not exceeding 353CF. 
The Clara 1000 oil mist separator operates on the centrifugal disc stack separation principle and requires minimal maintenance. The oil mist separator does not clog up and loose efficiency like a filtered technology - even under extreme conditions with high solids loading, such as casing or grinding applications.

As with other 3nine products, the Clara achieves a very high purification rate. The patented rotating disc stack separates the oil mist far more effectively than filtered based centrifugal technologies such as cyclones and rotary filters.

Efficient and low maintenance, the Clara offers a highly attractive operating economy over its life cycle. Compared with traditional filtered units, you save at least 50% annually on operating costs.

The Clara can easily be installed on most machine tools. This saves floor space and unnecessary pipe work. It also makes it easier to move the machine tools when production requirements change.


More visit : http://www.3nine.com/products/blue-line/clara-1000/


  
MODEL : EMMA

The Emma 2500 is the big sister in the 3nine BLUE LINE Series and was designed specifically for applications where a high air flow is essential, such as very large cabin or open machine tool.
The Emma oil mist separator develops 1500 CFM (2500m3/h) and works on enclosed cabins up to 710CF. Multiple Emma's can be used to create a solution for flow rates needed above 1500 CFM (3000 m3/h).
Like the other BLUE LINE products, the Emma 2500 employs disc stack centrifugal technology, so its maintenance requirements are minimal and efficiency is high and consistant.

The Emma 2500 is extremely compact for its capacity with a diameter of 26.4″ (670 mm) and a height of 45″ (1145 mm). This is one third of the size of an equivalent filtered solution. This means that the Emma 2500 can be installed above the machine tool and saves floor space and avoids unnecessary pipe work.


More visit : http://www.3nine.com/products/blue-line/emma-2500/



  
MODEL : PETRA

The Petra 1000 is specifically designed to handle applications with a very high solid content, such as cnc grinding, polishing applications, machining of cast iron and heat-treatment (quench oil) applications.
The Petra oil mist separator develops 600 CFM (1000 m3/h) and is suitable for all machine tools with a max cabin size of 353CF. It can easily be installed on most machine tools, which saves floor space and eliminates unnecessary pipe work and expensive pipe maintenance. This is important because these types of applications produce  a great deal of the solid particles that can drop out in the pipes. It also makes it easier to move the machine tool when production requirements change.

Like other BLUE LINE products, the Petra is a pure centrifugal separator, so its maintenance requirements are minimal. The patented rotating disc stack separates the oil mist far more effectively than filtered based centrifugal technologies such as cyclones and rotary filters.


More visit : http://www.3nine.com/products/blue-line/petra-1000/



  
Reference Installation's of 3nine Oil Mist Separators for Machine Tools.